TchP
Повелитель BOSCH
Телефонист
Откуда: Белоруссия, Минск
С нами с: 09.01.2003
Плодовитость: 104
     Рейтинг
Подано 11 (11/0) голосов
|
Выдержка из мануала
|
А вот что пишет сам Сименс по поводу юзания композитора:
Composer
--------
You can compose up to 20 melodies to be used as additional ringing tones.
View melodies
-------------
To edit or delete an existing melody, select the melody, press »OPTION« and select whether you want to edit or delete it.
Create melody
-------------
The notes are inserted via the keypad. Press to see which note is located on which key. The keys below have special functions:
8 Plays back the melody
9 Changes the tone/rest length (1/16, 1/8, 1/4, 1/2, 1/1)
0 Deletes a tone or a rest
# Inserts a rest
The cursor is moved by means of the arrow keys. A new tone is inserted to the right of the cursor and is marked in black. After 1/2 a second the cursor moves to the right of the inserted tone. As long as the tone is active (black) it can be edited.
Display indications:
--------------------
The top bar indicates the position of the cursor relative to the total length of the composition.
47 The number of the currently active tone.
1/16 Tone length (1/16)
C#6 Note (C) Sharp (#) Octave (6)
Tone and rest lengths are shown by symbols of different lengths, 1/16 being the shortest and 1/1 being the longest.
Whole notes are inserted in the white lines. Sharp notes are inserted in the grey lines. The black line indicates an octave.
Special side key functions:
---------------------------
Short press up: Moves the note up one frequency
Long press up: Moves the note up one octave
Short press down: Moves the note down one frequency
Long press down: Moves the note down one octave
When you insert a tone or a rest, the length will always be 1/16. Press the relevant key again, and the length will be changed into 1/8; press it twice, and it will be changed into 1/4 etc.
You cannot overwrite an inserted tone or rest. You have to delete the old one before you can insert a new.
When you have completed your composition, you can press »OPTION« and:
• Play back speed: Choose between 5 different standard play back speeds. The speed selected here will be the one which is used if you press »8« when composing
or editing a melody.
• Clear/Edit: You can delete the contents of a melody without changing the name or other settings related to the melody.
When you press »OK«, you will
be asked whether you really want
to delete all tones.
Press »YES« to return to the editor where you can enter a new melody.
If you press »NO«, you will also return to the editor and can now edit the existing melody.
• Tones sound: Select whether you want to hear the tones or not when composing your melody. Even if you have switched the tones sound off, you will still be able to listen to your composition by pressing 8 (Play back).
• Save: Give your melody a name and press »SAVE«. If you do not want to give the melody a name of your own choice, it will be stored under the name »My melody 1«.
If you press »EXIT« after completing your composition, you will be asked whether you want to leave the composer without saving your new/edited melody.
Press »NO« to return to the composer editor where you can make further corrections, if required.
Press »YES« to leave the composer without saving anything.
--------------------------------------------------------
Есть мануал на русском, но он отсканирован в .pdf в виде картинок, поэтому 10 метров весит ;(
Откуда качал - не помню, но найти его не легче, чем русскую девятую прошивку  . Но если будет много желающих (а их всегда было много), можно попробовать попросить админов выложить на сайте. |
____________________________
T28->(...3310, T10, T20, C/S/M35, J70, 8210, ...)->T65->S40!!! |
|
